|
Production
Reports
Production
Assembly Bills - This report brings together information concerning
products that are being used on a given project. The beginning of
the report tell about the general characteristics of the products
such as Name, Size, Name Variation. Then we have Part information
and below that Hardware info and Labor functions and finally location
of this product on the project.
Production
Cutlist Loose Parts - Parts such as Scribes and Support Panels
can be identified within the program as "Loose Parts".
Once identified as such these parts will then be selected to appear
on special reports like this.
Production
Cutlist Not Yielded - Here we see parts that have not been able
to be yielded in the optimization. This could be because of improper
data entry or because a larger stock size is going to be required.
Production
Cutlist sorted by Category - Part cutlist sorted into Part Categories
and Material Type.
Production
Cutlist sorted by Material - This report displays a Part cutlist
sorted by Material type.
Production
Department Summary - Department Summary can be used as a way
to determine Capacity Constraints in your facility and will aid
in Scheduling Production as well.
By
using this in Job Costing, this "budget" amount can provide
you with the ability to understand how you performed on a given
project as these values can be compared to the actual time that
it took to produce a project.
Production
Edging Usage by Height - This report has several uses. One is
that it can be used for the ordering of Edgeband for a project or
group of projects. Another is that it can be used to alert the Edgebander
operator as to how much material he will need to bring to the machine
before they begin edgebanging.
Production
Layups Not Yielded
Production
Operations sorted by Department - This report is gives a more
detailed look at labor on a project. Keytrix allows for "Economies
of Scale" when calculating labor. We also allow for Setup times
to perform specific duties. Each Department such as "Assembly"
have Operations associated with them. Labor can be applied to Colors,
Edging, Hardware, Material Compositions, Part & Products.
Production
Optimized Patterns - This report displays the cutting patterns.
This can be used at a manual saw for cutting instructions or at
an automatic saw as a check off sheet.
Production
Optimizer Summary
Production
Panel Saw Sheet Requirement - This report is used in Production
to instruct the saw operator how much and what type of material
to bring to the saw for processing.
Production
Part Labels - Part labels are available in many sizes. This
is a typical edge label. The information that is displayed can be
customized using a report writing application such as Infomaker.
These labels have been printed in order of the way the will be cut.
They can also be printed in numerical order.
Production
Product Labels - This label can be applied to the products at
the time of assembly. They are helpful for shipping as well as at
installation. The information listed here can be modified to meet
your needs better. The actual size of this label is 2-1/2"
x 3-3/4".
Installation
Elevation Report - Many of our clients use this report as an
aid during the installation process. This report can be posted on
the wall where the cabinets are to be installed. This gives the
installers an as built reference for installing the products.
Variation
Names
Product
Volume & Weight
Elevation
Report
Department
Summary
|
